LightRail®moves your indoor grow lights over the tops of the plants, reducing shadow patterns and reducing heat, getting those grow lights closer for maximum use of available wattage and PAR (Inverse Square Law), and getting the correct intensity of light on all the leaves for optimum Leaf Area Index (LAI) which is the single most important factor in increasing yield.
LightRail is perfect for any indoor grow light systems, supplemental greenhouse lighting, 4 season greenhouse grow lights, grow tent setups and larger commercial grow operations.
LightRail, the DIY light mover scalable for any space, should be considered an important part of your indoor grow light kits, and an integral part of any indoor grow light system.
Grow equipment, especially indoor plant light, should always be maximized and LightRail is the most effective way to get the most out of your indoor grow setup as part of your indoor grow kit.
What LightRail Kit is Right for me?
- LightRail 3.5 IntelliDrive Kit (120v only) (Best seller)
- Adjustable delay
- Set speed
- LightRail 4.0 AdjustaDrive Kit
- Adjustable delay
- Adjustable speed
- LightRail 4.20 AdjustaDrive Kit
- Non-adjustable delay
- Adjustable speed
—> All kits now come standard with Extreme Duty Trolley Wheels. These are recommended for heavier indoor grow lights +/ or multiple grow lamps moved with one motor. This grow light mover is rated up to 60 lbs. And, these wheels come with a lifetime warranty!
—> Upgrade to add the RoboStik. Used to orient the grow light perpendicular to the direction of travel.
—> Upgrade The RoboBar provides perfect support for moving any of the larger LED grow lights with Light Rail. The RoboBar dimensions are 42″ x 20″ (106cm x 50 cm), so provides triangulated, acute hanging angles for extra smooth travel along the Rail. The four hanging points provide easy support for any LED grow light including all 3’x3′ (.9m x .9m), all 4’x4′ (1.2m x 1.2m), all oversized rectangular LED grow lights, just any of the larger LED grow lights, all brands/any dimensions. With the RoboBar’s structural support, larger LED grow lights moved on a Light Rail can cover up to 100% more linear area per grow light.
Additional info on each LightRail Kit
LightRail 3.5 IntelliDrive Kit
LightRail 3.5 IntelliDrive Kit comes complete with a 10rpm Motor and a two-piece 2 meter (6’6”) Rail, installation hardware and instruction. The LightRail 3.5 IntelliDrive indoor grow kit can also be purchased as the Motor only with installation hardware and instructions – perfect for anyone who already has a Rail or who wants to purchase their Rail separately.
LightRail 3.5 IntelliDrive grow light systems travel at 10 RPM / approximately 4 feet per minute (1.2 meters), and has a zero to sixty-second adjustable time delay for pausing the grow lamp at the end of each run. LightRail 3.5 indoor grow system helps promote even growth from end to end and allows for equal light-time for the entire indoor grow light run.
LightRail 3.5 IntelliDrive, an integral part of your grow equipment, will move any indoor growing light, any hood – multiple sizes and weights and is a scalable system for your indoor grow lights where up to three indoor grow lights can move in-line with the use of one IntelliDrive Motor.
LightRail 4.0 AdjustaDrive Kit
LightRail 4.0 AdjustaDrive Kit comes complete with a variable speed LightRail Motor and a two-piece 2 meter (6’6”) Rail, installation hardware and instruction. LightRail 4.0 AdjustaDrive indoor grow systems can also be purchased as the Motor only with installation hardware and instructions – perfect for anyone who already has a Rail or who wants to purchase their Rail separately
With both a 0 to 60 second adjustable time delay for promoting even indoor plant growth from end to end plus the added feature of two to four feet per minute (.6m – 1.2m) adjustable speed control that covers a wide range of grow lamp intensities and travel distances, LightRail 4.0 AdjustaDrive is great for customers who want that additional control.
LightRail 4.0 AdjustaDrive will move any indoor grow light/ any hood, multiple sizes and weights and is a scalable system where up to three indoor growing lights can move in-line with the use of one light mover Motor.
LightRail 4.20 AdjustaDrive Kit
LightRail 4.20 AdjustaDrive Kit comes complete with a variable speed LightRail 4.0 AdjustaDrive Motor, a two-piece 2 meter (6’6”) Rail, an Add A Lamp Kit with another 2-meter Rail, Push/Pull Rod, Auxiliary Trolley, instructions and hardware for moving two indoor grow lights with the enclosed light mover Motor.
Move two lights along 4 meters (12’) of Rail and all from one Kit box – the LightRail 4.20 – With both a 0 to 60 second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute (.6m – 1.2m) adjustable speed control that covers a wide range of indoor grow lamp intensities and travel distances, LightRail 4.20 is great for customers who want that additional control.
LightRail 4.20 will move any indoor grow lights/ any hoods, multiple sizes and weights and is a DIY light mover as a scalable system where up to three indoor grow lights can move in-line with the use of one Motor.
Learn more:
LightRail 101
Planning your space
Side-by-side lab studies
Setting up your LightRail